Speedy 35mm End Cap 2 Sided Bay Window Curtain Pole Chrome

The Speedy 35mm End Cap 2-Sided Bay Window Curtain Pole in Chrome is designed for L-shaped and 2-sided bay windows, combining a bright, polished finish with simple End Cap finials for a clean, contemporary appearance. The passing ring system allows the curtain to travel along both sections of the pole and around the corner of the bay.

The Chrome finish has a bright, shiny and reflective appearance, while the understated End Cap finials keep the overall design neat and streamlined. It works particularly well in modern interiors and alongside other chrome fittings and accessories. We recommend using the product images as a guide to the appearance of the finish before ordering.

This bay pole is supplied as separate components for assembly and cutting to size during installation. The pole sections are not pre-cut to your individual bay window measurements, so you or your fitter will need to measure the bay and cut the poles to the required lengths using a fine-tooth hacksaw.

The complete set includes 35mm metal poles, End Cap finials, nylon-lined passing rings, adjustable wall-fix passing brackets and a double corner joint.

Smooth Passing Rings

The nylon-lined passing rings provide a smoother, quieter glide along the pole. Their C-shaped design allows the rings to pass over the specially designed passing brackets, enabling the curtains to travel along both sections of the bay.

For best performance, we recommend using curtains with a tightly gathered heading. Curtain hooks should be positioned in the top pocket of the curtain tape so that the curtains sit neatly beneath the passing rings. This helps prevent the weight of the curtain pulling down on the rings as they travel over the brackets.

Adjustable Corner Joint

The double corner joint connects the two sides of the bay and allows the passing rings to travel around the corner. The joint can be adjusted to accommodate angles up to 90 degrees, making the system suitable for a wide range of L-shaped and 2-sided bay window layouts.

The angle should be set during installation to match the shape of your bay window, allowing the two pole sections to meet correctly while maintaining a continuous route for the passing rings.

Choosing the Correct Size

This 2-sided bay window curtain pole is available in 350cm and 550cm overall kit sizes. It is important to check the individual pole sections supplied rather than relying only on the total kit length.

The 350cm kit is supplied with:

• 1 x 200cm pole
• 1 x 150cm pole

The 550cm kit is supplied with:

• 2 x 200cm poles
• 1 x 150cm pole

With the 550cm kit, the two 200cm poles can be connected using the supplied pole connector to create a section up to 400cm long. An additional bracket is supplied to support this join.

Before ordering, measure both sides of your bay window and check that the individual pole lengths supplied can be configured and cut to suit your measurements. The poles can be shortened using a fine-tooth hacksaw, but they cannot be made longer.

The specification table below shows the exact combination of poles, rings and brackets supplied with each size.

Installation Information

This bay window curtain pole requires cutting, assembly and installation by the customer or their chosen fitter.

The supplied passing brackets are wall-fix only and cannot be used for ceiling fixing. They have an adjustable projection of 90–125mm, and the bracket backplate measures approximately 53mm in length, so sufficient flat wall space is required for installation.

Wall fixing screws and plugs are not supplied. Suitable fixings should be selected according to the construction and condition of the wall where the brackets will be installed.

Important Information

This bay window curtain pole is not suitable for eyelet curtains and is designed for curtains weighing up to 15kg.

We do not recommend this system for very tall windows where the curtain rings cannot be comfortably reached and guided around the corner. Pulling the curtains from significantly below pole level can place additional downward pressure on the rings, increasing friction against the pole and passing components and making the curtains more difficult to operate.

Please check your bay window angle, measurements, individual pole lengths and suitability carefully before ordering.

Wall fixing screws and plugs are not supplied. Suitable fixings should be selected according to the construction and condition of the wall where the brackets will be installed.

Important: This bay window curtain pole is not suitable for eyelet curtains and should not be installed on tall windows where the rings cannot be comfortably guided around the bends. Excessive downward pressure on the rings can increase friction against the pole and brackets, resulting in reduced curtain glide and more difficult operation.